Alarms; Alarm Messages For Escalations; Other Alarm Messages; Output Control - QTech SMS Lite 4G User Manual

Alarms

Alarm messages for escalations

The first person in the multi-person escalation list receives a message and they are given the option
to reply BUSY:
Format:
e.g.
The last person in the escalation list receives a different message as they don't have the option to
reply BUSY:
Format:
e.g.

Other alarm messages

Other alarm messages have the following format.
Alarm has been acknowledged message:
<Site><Input> alarm has been acknowledged.
Alarm has not been acknowledged message:
<Site> <Input> alarm was NOT acknowledged.
SMS Lite returns to normal (Idle) state:
<Site><Input> has turned OFF.

Output Control

Control outputs by sending a text message containing on/off or pulse and the output name. In this
example Output 1 has been renamed 'Fan'
- Turn the specified output on
ON <output name> e.g. ON Fan
- Turn the specified output off
OFF <output name> e.g. OFF Fan
- To pulse an output on for one second then off again
PULSE <output name> e.g. "PULSE Fan", or "PULSE fan 1 sec"
The security for these commands is based on whether the phone number that sent the message is in the SMS Lite's
phone list. If the phone number is not in the list, the command will not be processed.
SMS Lite 4G– User Guide
<Site> <Input> has turned ON. Reply OK <Input> or BUSY <Input>. You are the <nth>
of N> to be sent this.
Shed1 Pump has turned ON. Reply OK Pump or BUSY Pump. You are the 2
person of 3 to be sent this message
<Site><Input> has turned ON. Reply OK <Input>. You are the <nth> of <N> to be sent
this.
Shed1 Pump has turned ON. Reply OK Pump. You are the 3rd person of 3 to be
sent this message
© 2021 QTech Data Systems Ltd
nd
14