Related Manuals for QTech QSR-3920 Series
Summary of Contents for QTech QSR-3920 Series
- Page 1 CONFIGURATION MANUAL QSR-3920 Series Router Configuration Manual QSR-3920-08 www.qtech.ru...
-
Page 2: Table Of Contents
3.2.6 System Control and Management Monitoring and Maintaining 4 FTP, FTPS, TFTP AND SFTP 4.1 Overview 4.2 FTP, FTPS, TFTP, and SFTP Function Configuration 4.2.1 Configure an FTP Server 4.2.2 Configure an FTP Client 4.2.3 Configure a TFTP Client 4.2.4 Configure a TFTP Server www.qtech.ru... - Page 3 6.2.4 Configuration File Managing, Monitoring, and Maintaining 7 SYSTEM MANAGEMENT 7.1 Overview 7.2 System Management Function Configuration 7.2.1 Configure the Device Name 7.2.2 Configure the System Time and Time Zone 7.2.3 Configure the Login Welcome Message 7.2.4 Configure the System Exception Processing Mode www.qtech.ru...
- Page 4 10.1 Overview 10.2 Software Upgrade Function Configuration 10.2.1 Upgrade the image Program Package 10.2.2 Upgrade the FPGA Program 10.2.3 Upgrade the bootloader Program 10.2.4 Upgrade devinfo File 10.3 Typical Configuration Example of Software Upgrade 10.3.1 Upgrade All Software Versions www.qtech.ru...
- Page 5 11.2.3 Upgrade the Bootloader Program 11.2.4 Bootloader Monitoring and Maintaining 11.3 Typical Configuration Example of Bootloader 11.3.1 Configure bootloader to Guide the Image Program from the File System 11.3.2 Configure bootloader to Guide the Image Program from the Network www.qtech.ru...
-
Page 6: System Operation Basics
Parsing of the commands that have been inputted by users Execution of system commands If a user configures the device through shell commands, the system provides multiple operating modes for the execution of the commands. Each command mode supports specific www.qtech.ru... - Page 7 Global Hostname(con Run the disable Configures the global configur privileged fig)# exit parameters that are ation user mode, command required mode exit device operation. configure common user terminal mode command. Interface In global Hostname(con Run exit In this mode, www.qtech.ru...
- Page 8 (For details, refer to the related sections in "System Operation Basics" of the command manual.) Note that the mode switchover command www.qtech.ru...
-
Page 9: Command Line Interface
And "Edit key" usage is the following: CTRL+A -- go to home of current line CTRL+E -- go to end of current line CTRL+U -- erase all character from home to current cursor CTRL+K -- erase all character from current cursor to end www.qtech.ru... - Page 10 List reflexive access lists access-lists Show acl lists acl-log-count Display the number of access list log acl-object Show acl object Command arp Protocol information BGP information bridge Bridge Forwarding/Filtering Database [verbose] Command cam card_list Show information of hardware modules www.qtech.ru...
- Page 11 Then, users can invoke the history commands saved by the command line interface at any time and execute the command repeatedly, reducing unnecessary efforts in re-typing the www.qtech.ru...
- Page 12 If the edit buffer is full, an alarm sound is played. The Backspace key Deletes the character before the cursor and moves the cursor backward. If the cursor reaches the beginning of the www.qtech.ru...
- Page 13 The Enter key, right arrow key → or Scroll the displayed information one line equal key = down. The left arrow key ← or the minus key - Scroll the displayed information one line Ctrl-H Return back to the topmost part of the displayed information. www.qtech.ru...
- Page 14 Configuration manual 1. System Operation Basics Any other keys Exit the display. Then, the information that has not been displayed will not be displayed. www.qtech.ru...
-
Page 15: System Login
For the related user configuration of Telnet and SSH remote login, refer to the login control and management manual. 2.2.1 Log in to Device via Console Port To connect a terminal to the device through the Console port to configure the device, perform the following steps: Step 1: Select a terminal. www.qtech.ru... - Page 16 Create a connection: Input a connection name, and select a Windows icon for the connection. Figure 2-2 Creating a connection Select a serial communication port: According to the serial communication port that has been connected, select COM1 or COM2. www.qtech.ru...
- Page 17 Configure parameters for the serial communication port: Baud rate: 9600 bps Data bit: 8 bits Parity check: None Stop bit: 1 bit Data stream control: None Figure 2-4 Configuring parameters for the serial communication port Login success authentication: www.qtech.ru...
-
Page 18: Configure Remote Login Via Telnet
Optional. the device. By default, the Telnet client is enabled. Take the device as a telnet [ vrf vrf-name ] Mandatory. Telnet client for remote { hostname | remote-host login. [ port-number ] [ ipv4 | www.qtech.ru... -
Page 19: Configure Remote Login Via Ssh
The device acts as an SSH client to log in to the specified SSH server remotely through the SSHv1 or SSHv2 protocol. During the login, a user name and a password are required for authentication from the SSH server. Table 2-5 Taking an SSH client for remote login Step Command Description www.qtech.ru... -
Page 20: System Login Monitoring And Maintaining
2.3.1 Configure a Local Terminal to Telnet to the Device Network Requirements A PC is used as a local terminal to log in to the device through Telnet. A route must be available between the PC and the device. Network Topology www.qtech.ru... - Page 21 Figure 2-6 Window displayed after telnet success After logging in to the device successfully, input the correct enable password to obtain the required operation rights of the device. To log out of the device, input the exit command continuously or press the shortcut key Ctrl+c. www.qtech.ru...
-
Page 22: Configure A Local Device To Log In To A Remote Device Via Telnet
Connect to 2.0.0.1 ...done Device2> After logging in to the Device2 successfully, input the correct enable password to obtain the required operation rights of the device. To log off the device, input the exit command continuously or press the shortcut key Ctrl+c. www.qtech.ru... -
Page 23: Configure A Local Device To Log In To A Remote Device Via Ssh
Figure 2-8 Network topology for configuring a local device to log in to a remote device via SSH Configuration Steps Step 1: Configure the local user and related attribute. #Configure Device2. Device2>enable Device2#configure terminal Device2(config)#user admin password 0 admin Step 2: Enable the SSH server function of Device2. Device2>enable Device2#configure terminal www.qtech.ru... - Page 24 The SSH server can be configured not to use authentication. If the SSH server does not use authentication, when a client logs in, a user can use any character string as the user name and password. www.qtech.ru...
-
Page 25: System Control And Management
Configure line properties. Enter the line configuration mode of the Console port. Enter the line configuration mode of the Telnet or SSH user. Configure the absolute time for the login user operation. Configure the privilege level of the login user. www.qtech.ru... -
Page 26: Switch Over Between User Levels
If the enable password has not been configured, use the none authentication method, that is, the login passes the authentication by default. If AAA has not been configured, the "% No password set" message is prompted, and the authentication fails. www.qtech.ru... - Page 27 Then, the user has the authority of the user level. If a user runs the command in the privileged user mode, the user level switchover is performed according to the command parameter. www.qtech.ru...
-
Page 28: Configure The Command Level
The enable password is the password that is used by a level of users to enter the local level. If no level is specified in the enable command, the password is set as the enable password of level 15 by default. Table 3-4 Configuring the enable password Step Command Description www.qtech.ru... -
Page 29: Configure Users And The Related Properties
Configure No Password Authentication during Login During the user login, if no password authentication is required, configure the no password authentication function. Table 3-6 Configuring no password authentication during login Step Command Description Enter global configure terminal configuration mode. www.qtech.ru... - Page 30 To ensure the security of the user account, you can configure the live time of the user to regularly remind the user to change the password. Table 3-9 Configuring the live time of the user Step Command Description Enter global configure terminal configuration mode. Configure the live time user username live-time user- Optional www.qtech.ru...
- Page 31 When it is necessary to limit the service type owned by the user, you can configure the service type of the user. Table 3-12 Configuring the service type of the user Step Command Description Enter global configure terminal configuration mode. Configure the service user username service-type Optional type of the user type www.qtech.ru...
- Page 32 To limit users to configuration commands of different privilege levels, you need to grant different privilege levels to different users. Table 3-15 Configuring the user privilege level Step Command Description Enter global configure terminal configuration mode. Configuring the privilege user username privilege Mandatory level of the user. privilege-level-number www.qtech.ru...
-
Page 33: Configure Line Properties
Table 3-17 Entering the line configuration mode of the Telnet or SSH user Step Command Description Enter global configure terminal configuration mode. Enter line line vty { vty-min-number } [ Mandatory configuration mode of vty-max-number ] the Telnet or SSH user. yty resources are shared by the SSH and Telnet. www.qtech.ru... - Page 34 { con 0 | vty vty-min- Mandatory. configuration mode of number [ vty-max-number ] } the Console port or VTY. Configure the privilege privilege level level-number Mandatory. level of the login user. The privilege level is 1. www.qtech.ru...
- Page 35 { con 0 | vty vty-min- Mandatory. configuration mode of number [ vty-max-number ] } the Console port or VTY. Configure auto autocommand-option Mandatory. command execution nohangup [ delay delay-time- options. number ] | delay delay-time- number [ nohangup ] } www.qtech.ru...
- Page 36 Step Command Description Enter global configure terminal configuration mode. Enter line line { con 0 | vty vty-min- Mandatory configuration mode of number [ vty-max-number ] } the Console port or VTY. Configure line password 0 password Mandatory password. www.qtech.ru...
- Page 37 Enter line line { con 0 | vty vty-min- Mandatory configuration mode of number [ vty-max-number ] } the Console port or VTY. Configuring authorization exec Mandatory authorization mode. commands level } { default | word } www.qtech.ru...
- Page 38 The Console port of the device provides the functions of the AUX port. Therefore, you can enable the Modem function of the Console port to support remote dial-up login. Table 3-27 Enabling the modem function of the console port Step Command Description Enter global configure terminal configuration mode. www.qtech.ru...
- Page 39 { access- Optional of the IPv6 address list-number | access-list- The IPv6 ACL number name } in range is 7001-8000 Configure the egress ACL ipv6 access-class { access- Optional of the IPv6 address list-number | access-list- name } out www.qtech.ru...
-
Page 40: System Control And Management Monitoring And Maintaining
Table 3-30 System control and management monitoring and maintaining Command Description clear line { con con-number | vty vty- Clear a terminal service. number } show privilege View the privilege level of the current user. show users Display the configured user information. www.qtech.ru... -
Page 41: Ftp, Ftps, Tftp And Sftp
SSL function. On the device, only the FTP client supports the function. Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol which is based on the User Datagram Protocol (UDP). It transmits data through UDP port 69. The protocol is designed for www.qtech.ru... -
Page 42: Ftp, Ftps, Tftp, And Sftp Function Configuration
FTP client can access the FTP server. For security sake, the device provides the FTP service only to authorized users, and it limits the maximum allowed number of concurrent login users. Table 4–2 Configuring the functions of an FTP server Step Command Description Enter global configure terminal configuration mode. www.qtech.ru... -
Page 43: Configure An Ftp Client
FTP client and set up a connection with the remote FTP server. The connection between an FTP client and an FTP server uses the address of the outgoing interface of the route to the FTP server as the source address by default. Users can also use the www.qtech.ru... -
Page 44: Configure A Tftp Client
TFTP client and set up a connection with the remote TFTP server. The connection between a TFTP client and a TFTP server uses the address of the outgoing interface of the route to the TFTP server as the source address by default. Users can also use www.qtech.ru... -
Page 45: Configure A Tftp Server
Before configuring the device as the TFTP server, first enable the TFTP server functions, and then, the TFTP client can access. Table 4-5 Configure the functions of a TFTP server Step Command Description Enter global configure terminal configuration mode. www.qtech.ru... -
Page 46: Configure An Sftp Server
Command Description Configure the device as sftp { get | put } [vrf vrf- Optional the SFTP client to upload name] host-ip-address or download the file to port-number [source- the SFTP server interface interface-name] user password src- filename dest-filename www.qtech.ru... -
Page 47: Ftp, Tftp And Sftp Monitoring And Maintaining
#In the file system mode of the Device, copy one file from the FTP server to the file system of Device. Device#filesystem Device(config-fs)#copy ftp 2.0.0.1 admin admin rp34-7.3.0.26(R).pck file- system rp34-7.3.0.26(R).pck #In the file system mode of Device, copy the startup file of Device into the FTP server. www.qtech.ru... -
Page 48: Configure A Device As An Ftp Server
On the FTP server Device1, the user name is admin, and the password is admin. The file system directory of Device1 acts as the root directory of the FTP server. PC and Device2 act as the FTP client to upload files to and download files from the FTP server Device1. www.qtech.ru... - Page 49 #Check whether the FTP service function is enabled on Device1. Device1#show ip sockets Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address (state) -------- ----- ------ ------ ---------------------- ---------------------- ------- ------- 701bb4a4 TCP 0.0.0.0.21 0.0.0.0.0 LISTEN www.qtech.ru...
- Page 50 #In the Windows DOS screen, input the correct IP address, user name, and password to log in to the FTP server. D:\>ftp 2.0.0.1 Connected to 2.0.0.1. 220 FTP server ready User (2.0.0.1:(none)): admin 331 Password required Password: 230 User logged in ftp> www.qtech.ru...
- Page 51 #Configure the PC and FTP server to transmit data in binary mode. ftp>binary Figure 4-4 Configuring the PC and FTP server to transmit data in binary mode #Obtain the startup file in the file system of the FTP server Device1. ftp>get startup www.qtech.ru...
-
Page 52: Configure A Device As An Tftp Client
A PC acts as a TFTP server, and Device acts as a TFTP client. The network between the server and the device is normal. The files to be downloaded are placed in the TFTP server directory. The device acts as the TFTP client to upload files to and download files from the TFTP server. www.qtech.ru... - Page 53 APR-10-2008 04:18:48 startup 101210 APR-10-2008 21:04:42 logging APR-10-2008 21:07:32 secret 10352116 APR-06-2008 02:47:02 rp34-7.3.0.26(R).pck If the "Total 51054 bytes copying completed!" message is printed, it indicates that the file copy is successful. The message shows the file size, www.qtech.ru...
-
Page 54: Configure A Device As An Sftp Client
#Upload the startup file of the Device file system to the SFTP server. Device#sftp put 2.0.0.1 22 admin admin startup startup.txt The authenticity of host '2.0.0.1 (2.0.0.1)' can't be established. RSA key fingerprint is e4:dd:11:2e:82:34:ab:62:59:1c:c8:62:1d:4b:48:99. Are you sure you want to continue connecting (yes/no)? yes www.qtech.ru... -
Page 55: Configure A Device As An Sftp Server
Configure the IP address of the interface so that the network between the PC and the Device is normal. (Omitted) Step 2: On the Device, enable the SFTP server, and configure the authorized user name and password. # On the SFTP server Device, configure the authorized user name and password. Device#configure terminal www.qtech.ru... - Page 56 #After uploading the file, you can find the corresponding file in the file system of Device. Device(config-fs)#dir size date time name ------------ ------ ------ -------- 2048 JUN-30-2015 16:35:50 tech <DIR> 10229 JUN-12-2015 14:31:22 history 101890 JUN-30-2015 17:46:40 logging 39755 JUN-30-2015 16:33:56 startup 740574 MAY-27-2014 18:55:14 web-Spl-1.1.243.rom www.qtech.ru...
-
Page 57: Configure A Device As An Ftps Client
Device(config)#crypto ca import certificate to test % Input the certificate data, press <Enter> twice to finish: -----BEGIN CERTIFICATE----- MIIDBzCCAnCgAwIBAgIITpXH17Hj/AswDQYJKoZIhvcNAQEFBQAwYjELMAkGA1UE BhMCQ04xEDAOBgNVBAgMB0JFSUpJTkcxDjAMBgNVBAoMBUNJRUNDMQ8wDQYDVQQL DAZHRkEgQ0ExIDAeBgNVBAMMF01pbmlDQSBGcmVCU0QgUm9vdCBDZXJ0MB4XDTA5 www.qtech.ru... - Page 58 % Please answer 'yes' or 'no'. % Do you accept this root ca-certificate[yes]/[no]: Nov 11 2015 19:06:04: %PKI-CERTIFICATE_STATECHG-5: Certificate(issuer:C=RU, ST=MOSCOW, O=FOOBAR, OU=FOOBAR, CN=MiniCA FreBSD Root Cert, sn:4E95C7D7B1E3FC0B, subject:C=RU, ST=MOSCOW, O=FOOBAR, OU=FOOBAR, CN=MiniCA FreBSD Root Cert) state valid % PKI: Import Certificate success. www.qtech.ru...
- Page 59 ST=moscow, L=moscow, O=foobar, OU=foobar, E=user@example.ru, CN=rsa2) state valid % PKI: Import Certificate success. #After importing the certificate successfully, you can use the command show crypto ca certificates to view that the status is Valid. Device#show crypto ca certificates www.qtech.ru...
- Page 60 Fingerprint(sm3):504599a2f170c51b62b2f8b0850f33a5595bc9e592d14eae9c90b1e59de 35a89 Fingerprint(sha1):080614a82cc4f3786458c585f9a58edf19da19bd Associated Identity: test index: 4 Step 4: Upload and download the file between FTP Client and FTP Server. #FTP Client uploads the file to the FTP Server. Device#filesystem Device1(config-fs)#copy file-system startup ftps 1.0.0.1 startup VerifyType peer www.qtech.ru...
- Page 61 Downloading################################################################# ############################################################################ ############################################################################ ################################################################## OK! Step 5: Check the result. #After downloading, view the downloaded file in the file system of Device. Device(config-fs)#dir size date time name ------------ ------ ------ -------- 10189 NOV-04-2015 20:27:03 history 436578 NOV-04-2015 20:33:08 test.doc www.qtech.ru...
-
Page 62: File System Management
Display the information about a storage device. Format a storage device. Remove a storage device. Manage file directories Display the information about a file directory. Display the current working path. Change the current working path. Create a directory. Delete a directory. www.qtech.ru... -
Page 63: Manage Storage Devices
Format the Storage Devices If the space of a storage device is unavailable, you can use the format command to format the storage device. Table 5-3 Formatting a storage device Step Command Description Enter the file system filesystem configuration mode. www.qtech.ru... -
Page 64: Manage File Directories
Display the Information about a File Directory By displaying the information about a file directory, you can view the details of the files in the specified directory. Table 5-5 Displaying the information about a file directory Step Command Description www.qtech.ru... - Page 65 Change current cd path Mandatory working path. Create a Directory If you want to create a directory in the file system, perform this operation. Table 5-8 Creating a directory Step Command Description Enter the file system filesystem configuration mode. www.qtech.ru...
-
Page 66: Manage File Operations
Copy a File In the file system, you can copy a file to the specified directory. Table 5-10 Copying a file Step Command Description Enter the file system filesystem configuration mode. Copy a file. copy src-parameter dest- Mandatory parameter www.qtech.ru... - Page 67 Display the content of a type path/filename Mandatory file. Delete a File In the file system, you can delete a file that is no longer in need. Table 5-7 Deleting a file Step Command Description Enter the file system filesystem configuration mode. www.qtech.ru...
-
Page 68: Download Files From The Ftp
[ vrf vrf-name ] host- Optional server ip-address usrname password src-filename { /flash | /sdcard | dest-filename } Download a file from the FTP ftpscopy [ vrf vrf-name ] host- Optional security server ip-address usrname password src-filename { /flash | /sdcard www.qtech.ru... -
Page 69: Execute A Configuration File Manually
Exercise caution in manually executing a configuration file, because it modifies the current configuration of the system forcedly, and this may affect the system services. By default, the startup configuration has been loaded during system startup. 5.2.6 Configure Startup Parameters Configuration Condition Before configuring startup parameters, ensure that: www.qtech.ru... -
Page 70: File System Managing, Monitoring, And Maintaining
5.3.1 Configure Startup Parameters Network Requirements A PC is used as the local terminal to log in to the device in the Telnet mod The route between the PC and the device must be reachable. Network Topology www.qtech.ru... - Page 71 0. Device#filesystem Device(config-fs)#boot-loader /flash/ rp39-7.3.2.26(v2.3.0.309)-debug.pck #View the configuration result. Device#filesystem Device(config-fs)#show boot-loader boot next time flash0: /flash/ rp39- 7.3.2.26(v2.3.0.309)-debug.pck The app to boot at the this time is: g0: rp39-7.3.2.26(R).pck Boot-loader0: flash0: /flash/ rp39-7.3.2.26(v2.3.0.309)-debug.pck Boot-loader4: backup0: rp39-7.3.2.26(v2.3.0.309)-debug.pck www.qtech.ru...
-
Page 72: Configuration File Management
Commands are organized according to their relations. The related commands form a group, and different groups are separated by blank lines. 6.2 Configuration File Management Function Configuration Table 6-1 Configuration file management list Configuration Tasks www.qtech.ru... -
Page 73: Save The Current Configuration
Saving the current configuration not only saves the configuration to the startup configuration file, but also saves the configuration to the backup startup configuration file. 6.2.2 Configure the Backup System Configuration Condition Before configuring the backup system parameters, ensure that: www.qtech.ru... - Page 74 ] { hostname host through the FTP | ip-address } username protocol. password dest-filename | ftps [ vrf vrf-name ] { hostname | ip-address } username password dest- filename VerifyType none | peer }} www.qtech.ru...
-
Page 75: Restore The Startup Configuration
When restoring the file to the device again, it does not pass the check, and as a result, the configuration file fails to be restored. 6.2.4 Configuration File Managing, Monitoring, and Maintaining Table 6-6 Configuration file managing, monitoring, and maintaining Command Description clear startup Delete the default startup configuration www.qtech.ru... - Page 76 } | redirect { file filename | ftp { [ vrf vrf- after the configuration file is restarted name ] { hostname | ip-address } user- at this time or next time. name password file-name } } ] www.qtech.ru...
-
Page 77: System Management
Configure to restart the device. Configure to restart the device. Configure encryption Configure the encryption service. service. Configure the history command Configure the history command saving function. saving function. Configure the login security Configure the login security service. service. www.qtech.ru... -
Page 78: Configure The Device Name
Table 7-3 Configuring the system time and time zone Step Command Description Enter global configure terminal configuration mode. Configure the system clock timezone { MOSCOW | { Mandatory. time. timezone-name-string hour- The default is Universal offset-number [ minute www.qtech.ru... -
Page 79: Configure The Login Welcome Message
10s, 10s, and 30s respectively. Secondly, an exception level is configured. If exceptions of the level and higher levels occur, the device restarts. Exception levels include: alert, critical, emergency, error, and warn. Table 7-5 Configuring the system exception processing mode Step Command Description www.qtech.ru... -
Page 80: Configure To Restart A Device
In a hot restart, the user restarts the device by using a restart command. During the hot restart process, the device is not powered off. Table 7-6 Restarting a device Step Command Description command reload Mandatory restart the device. www.qtech.ru... -
Page 81: Configure The Encryption Service
Before the history command saving function is configured, history commands are saved in the memory file system. After the function is configured, the system automatically saves history commands in the flash file system. Table 7-8 Configuring the history command saving function Step Command Description www.qtech.ru... -
Page 82: Configure The Login Security Service
Table 7-9 Enabling the system login security service Step Command Description Enter global configure terminal configuration mode. Enable the system login service login-secure Mandatory. security service. {telnet | ssh | ftp | By default, the system snmp} login security service is enabled. www.qtech.ru... -
Page 83: Configure Cpu Monitoring
7.2.9 Configure CPU Monitoring Configuration Condition None Configure CPU Monitoring With CPU monitoring, the system monitors the CPU occupancy to learn the current operation status of the CPU. The following shows the contents of CPU monitoring: www.qtech.ru... -
Page 84: Configure Display Of Properties In
Description Enter the privileged user mode Configure display more { on | off | displine Mandatory. properties in pages. [ num ] } By default, the function of display pages enabled. By default, 24 lines are displayed in displine. www.qtech.ru... -
Page 85: Configure A Serial Number For A Module Part
The serial number is a unique serial number that identifies a module part (including MPU and LPU) of the device. This facilitates user inventory management. Users can delete the serial number of a module part of the device according to the requirement. www.qtech.ru... -
Page 86: System Management Monitoring And Maintaining
Display the information about the board temperature. show history Display the information about history commands. show language Display the information about system language version. show login-secure [telnet | ssh | ftp | View system login security www.qtech.ru... - Page 87 Display the MPU information. show system power Display the power supply information. show tech-support [ detail | page [ Display technical support detail ] | to-flash ] information. show version [ detail ] Display the system version information. www.qtech.ru...
-
Page 88: System Alarm
By default, the CPU temperature alarm threshold is 95 the temperature alarm threshold of the air outlet is 80°, and the temperature alarm threshold of the switching chip is 95°. Table 8-2 Configuring system temperature alarms www.qtech.ru... -
Page 89: Configure System Power Supply Alarms
Configure System Alarm Types to Be Shielded Configuring system alarm types to be shielded means shielding alarm types of different levels. The following four alarm types will be shielded, minor, major, critical, and all Table 8-3 Configuring system alarm types to be shielded www.qtech.ru... -
Page 90: System Alarm Monitoring And Maintaining
| critical | all } shielded. 8.2.5 System Alarm Monitoring and Maintaining Table 8-4 System alarm monitoring and maintaining Command Description show sysalarm shield [type ] Display the system alarm types to be shielded. www.qtech.ru... -
Page 91: System Log Management
Table 9-2 Log output directions Log Output Direction Description Control console System log information is outputted to the Console terminal. Monitor console System log information is outputted to the Telnet or SSH terminal. www.qtech.ru... -
Page 92: System Log Function Configuration
The following figure shows the schematic diagram. Figure 9-1 System log schematic diagram 9.2 System Log Function Configuration Table 9-3 System log function list www.qtech.ru... -
Page 93: Configure Log Output Functions
Enable the log output logging enable Optional. function. By default, the log output function is enabled. Enable log display on the logging console [ logging- Optional. control console. level ] By default, log display on the control console is www.qtech.ru... - Page 94 For details, refer to the sections in log server configuration. Table 9-6 Configuring log output to the log server Step Command Description Enter global configure terminal configuration mode. Enable the log output logging enable Optional. www.qtech.ru...
- Page 95 IPv6 source address of the transmitted information. Configure source logging source-interface Optional interface sent by log interface-name By default, the outgoing information interface information transmission determined according routing which can use the main IP www.qtech.ru...
- Page 96 [ logging-level ] By default, the function of saving logs into the flash memory is enabled. Configure logs to be saved logging buffer [ logging- Optional. into the memory. level ] By default, the function of saving logs into www.qtech.ru...
-
Page 97: Configure The Timestamp For Logs
] ] no year and millisecond precision display. The uptime refers to the run time starting with device startup. The datetime refers to the time of the real-time clock. The localtime refers to local time. www.qtech.ru... -
Page 98: Configure A Log Task Name
Table 9-10 Configuring the log filtration function Step Command Description Enter global configure terminal configuration mode. Configure logging filter { exclude Optional. filtration function. exclude-string | include default, include-string | level high- filtration function level low-level } disabled. www.qtech.ru... -
Page 99: Configure The Log File Capacity
By default, the log display color function is enabled. The following table shows the default colors corresponding to the log levels. Table 9-12 Description of system log colors Field Description emergencies alerts Purple critical Blue errors Brown warnings Cyan notifications White www.qtech.ru... -
Page 100: System Log Monitoring And Maintaining
Display the filtration configuration of logs. show logging [ syslog ] message- Display the size of log files and number of log counter records. show logging time / level Display logs according to the log level or log time range. www.qtech.ru... -
Page 101: Software Upgrade
Table 10-1 Software upgrade function list Configuration Tasks Upgrade the image program package. Upgrade the image program in TFTP/FTP mode. Upgrade the FPGA program Upgrade the FPGA program via the TFTP/FTP mode Upgrade the bootloader program Upgrade the bootloader program via the TFTP/FTP mode www.qtech.ru... -
Page 102: Upgrade The Image Program Package
If the reload subcommand is not added, run the reload subcommand or power off the device to reboot it after the upgrading is completed. The following command lines will be displayed: downloading "rp39-7.3.2.80(R).pck" : www.qtech.ru... -
Page 103: Upgrade The Fpga Program
During the upgrade process, the device must not be powered off or restarted. Otherwise, the system may fail to start, or the flash file system of the device may be damaged. 10.2.2 Upgrade the FPGA Program Configuration Condition Before upgrading the FPGA program, first complete the following tasks: www.qtech.ru... - Page 104 Hostname#sysupdate 128.255.32.10 ir0092sa-fp_fpv006_106.bin fpga lpu 3 ftp a Download "ir0092sa-fp_fpv006_106.bin" from "128.255.32.10" ############################################################################ ############ ############################################################################ ########## ############################################################################ ############ ##################################################OK Do you really update "SA" at slot 3 (yes|no)? :y Erase flash :......Erase flash done! Update flash:..............................................................................www.qtech.ru...
-
Page 105: Upgrade The Bootloader Program
Enter the privileged user mode, ensure that the device can obtain the upgrade program through the external TFTP/FTP server, and then use the sysupdate bootloader command to upgrade the program package. Table 10-4 Upgrading the bootloader program in TFTP/FTP mode Step Command Description Enter the privileged none Mandatory. www.qtech.ru... - Page 106 Therefore, the reload option is not recommended. After the upgrade is completed, to run the new bootloader program, restart the device. Select the correct bootloader version for upgrade to prevent the abnormality. www.qtech.ru...
- Page 107 { speed } Optional. the Console port and Modify the baud rate of the HyperTerminal device Console port to 115200 improve the upgrade bps. Then, disconnect the speed. HyperTerminal, and modify baud rate HyperTerminal to 115200 bps, then connect HyperTerminal again. www.qtech.ru...
- Page 108 Image validated. Header size 192, data size 1357664 Header crc 0x33e468d1, data crc 0x2a49bb1f Image link address is 0xffffffffc0000000 ........done Un-Protected 39 sectors ........done Erased 39 sectors run command=cp.b $(loadaddr) 0x1f400000 0x200000 Copy to Flash... done ........done Protected 39 sectors Update bootloader OK. www.qtech.ru...
-
Page 109: Upgrade Devinfo File
Upgrade devinfo File via TFTP/FTP Enter the privileged user mode, ensure that the device can get the upgrade program from the external TFTP/FTP server, and then upgrade via the sysupdate devinfo command. Table 10-6 Upgrading the devinfo file via TFTP/FTP Step Command Description www.qtech.ru... - Page 110 Select the correct devinfo file version to upgrade, so as to avoid the abnormality. During the upgrade process, the device must not be powered off or restarted. Otherwise, the system may fail to start, or the devinfo file may be damaged. www.qtech.ru...
-
Page 111: Typical Configuration Example Of Software Upgrade
#Use the sysupdate command to upgrade the bootloader program of the host. Device# sysupdate bootloader 2.0.0.1 bootloader-qsr3920-1.0.13.bin ftp admin admin The information about the upgrade procedure of the bootloader program and whether the upgrade is successful will be printed www.qtech.ru... - Page 112 #Check whether the image program, bootloader program, and FPGA program have been upgraded successfully. The control cards include QSR-M-3920-3ESP3, QSR-M-3920-3ESP5, and QSR-M-3920-3ESP10. Take QSR-M-3920-3ESP5 as an example to perform the show operation. Device#show system System Card Information(Mpu 0 - ONLINE) ---------------------------------------------------------------- Type: QSR-M-3920-3ESP5(V1)[0x10431002] Status: Start Ok Card-Port-Num: Serial No.: www.qtech.ru...
- Page 113 Core-Idx-00 Core-Status: 0000 Core-Utilization: Core-Idx-01 Core-Status: 0000 Core-Utilization: 100% Core-Idx-02 Core-Status: 0000 Core-Utilization: 100% Core-Idx-03 Core-Status: 0000 Core-Utilization: 100% Core-Idx-04 Core-Status: 0000 Core-Utilization: 100% Core-Idx-05 Core-Status: 0000 Core-Utilization: 100% Core-Idx-06 Core-Status: 0000 Core-Utilization: 100% Core-Idx-07 Core-Status: 0000 Core-Utilization: 100% www.qtech.ru...
- Page 114 System Card Information(Lpu 1 - ONLINE) ---------------------------------------------------------------- Type: QSR-LX9-M-24GETS(V1)[0x10431005] Status: Start Ok Card-Port-Num: Serial No.: Card-Name: QSR-LX9-M-24GETS(V1) Description: Hardware-Information: PCB-Version: H001 CPLD-Version: 101 ---------------------------------------------------------------- STATISTICS: 1 IN, 0 OUT, 0 IERR, 0 OERR The FPGA version of LPU2 is the new FPGA version. www.qtech.ru...
-
Page 115: Upgrade The Bootloader Program Via The Console Port
Set the transmission rate to 115200 bps to improve the upgrade speed. bootloader# srate 115200 #After setting the transmission speed of the Console port of bootloader, you should set the transmission speed of the HyperTerminal also to 115200 bps. Step 4: On the bootloader screen, upgrade the bootloader version. www.qtech.ru... - Page 116 If the default rate of the Console port has been modified in upgrading the bootloader program, the rate of the device Console port automatically resumes to 9600 bps when loading the image program package. At this time, the rate of the HyperTerminal needs to be modified synchronously. www.qtech.ru...
-
Page 117: Bootloader
Flow control mode: None Check mode: None Stop bit: 1 bit Data bit: 8 bits 11.2.2 Set the Bootloader Boot Parameters Configuration Condition None Set bootloader Boot Parameters Table 11-2 Set the Bootloader boot parameters www.qtech.ru... -
Page 118: Upgrade The Bootloader Program
Configuration Condition None Upgrade the Bootloader Program Table 11-3 Upgrade the Bootloader program Step Command Description Enter the Bootloader None Mandatory. configuration mode After the device is powered on, press the Ctrl + C keys to enter the Bootloader www.qtech.ru... -
Page 119: Bootloader Monitoring And Maintaining
The PC is directly connected with the Console port of the device. Use the Console port to upgrade the bootloader program of the device. Network Topology Figure 11-1 Networking for configuring bootloader to guide the Image program from the file system www.qtech.ru... -
Page 120: Configure Bootloader To Guide The Image Program From The Network
0 dc0 rp39-7.3.2.80(R).pck 192.168.0.2 192.168.0.1 print index:0 boot param info: boot dev: ge0 boot file: rp39-7.3.2.80(R).pck boot local ip: 192.168.0.2 boot host ip: 192.168.0.1 bootloader# #Input the boot command to start guiding the Image program. bootloader# boot www.qtech.ru...