Husqvarna LP 6500 I Operator's Manual page 9

2. Release the lock lever and lower the handle
carefully.
To adjust the handle height
• Adjust the handle height with the vibration damping
units for the handle.
a) Turn the screws for the vibration damping units
to adjust the handle height.
CAUTION: Adjust the screws to the
same height to make sure that the load
on the handle is balanced.
1503 - 001 - 12.11.2020
To start the product manually
Do this procedure if the product has an engine with
manual start.
1. Make sure that the control for forward and rearward
movement (A) is in the neutral position.
B
A
2. Make sure that the vibration control (B) is in the OFF
position.
3. Pull the starter rope until the engine starts.
To start the product with electrical start
Do this procedure if the product has an engine with
electrical start.
9