Table of Contents
Advertisement
Understanding the LEDs
This section explains the LEDs used to report the component status
of your Storage Enclosure.
For more LED information for the Adaptec Storage Enclosure, see
the chapter in this Guide that's dedicated to the specific interface for
your enclosure.
Front Panel LEDs
There are four LEDs on the front panel of the enclosure (shown at
right).
The LEDs function as described in
Table 3-1 Front Panel LEDs
LED
On
1
Enclosure power on
2
Shelf fault
3
FS4100/FS4500:
Enclosure speed is
3 GB/second
SC4100:
Split-bus
configuration
FC4100:
Not used
4
Not used
(Chapter 5
to
Chapter
Off
Enclosure power off
No shelf fault
Enclosure speed is
1.5 GB/second
Joined-bus
configuration
7.)
Table
3-1.
Monitoring
LED
1
2
3
4
3-3
Advertisement
Table of Contents
