9.1. SCSI-ID (ID 1, ID 2, ID4) (Default ID)
This 3 bit binary header sets the SCSI-ID number.
When setting numbers, follow the application software instructions.
Header
SCSI-ID
0
1
2
3
4
5
6
7
O: Open
9.2. Parity (PRTY)
To enhance data bus reliability, set this Header to "S" to activate the parity bit check function on
SCSI data bus.
This setting cannot be used if no parity generation function is provided on the I/F card.
Header
O
The drive does not check parity although the output parity is effective.
S
The drive checks parity, and also the output parity is effective.
O: Open
9.3. Terminator Power ON/OFF (TERM ON/OFF)
This Head setting turn on or turn off the terminator.
Header
O
The terminator is turn off.
S
The terminator is turn on.
O: Open
LSB
ID 1
O
S
O
S
O
S
O
S
S: Short
Description
S: Short
Description
S: Short
MSB
ID 2
ID 4
O
O
O
O
S
O
S
O
O
S
O
S
S
S
S
S
21/27
XM-6401B Rev.1.0