Table of Contents
Advertisement
8.2. Headphones Output
(1) Output Level
(Attenuator Level is 0 dB)
(2) Level Adjust Controller
(3) Load Impedance
8.2.1. Connector
3.5 mm dia. Stereo Headphone Jack
8.3. Audio Modes
(1) 16 Modes including 'stereo', 'Rch Mono', and 'Mute' are selectable by command.
Default mode is 'Stereo'. Audio out automatically muted in the digital area and
seek state.
(2) 128 Steps of attenuation level for the Audio Output (both Line Out and Headphones
Out together) is selectable by command.
Default level is 0 dB.
9. Jumper Setting/Feature Selections
Set up of SCSI-ID number, Parity Check function, Eject Button inhibit function and CD-Audio
Playback mode etc. are available by shorting these Headers.
ID 1 ID 2
Figure 16 Mode Select Headers
TERM
ID 4 PRTY
ON/OFF
PRV/ALW TEST
0.8 V (rms Typ)
Continuous Type (Thumb Wheel Knob)
100 OHM (Nominal)
POWER
SUPPLY
20/27
XM-6401B Rev.1.0
Advertisement
Table of Contents
