Hdmi Capture Use Case; Table 8. Full Menu Input Sequence For Hdmi Capture Use Case - D3 DesignCore RVP-TDA3 Series Quick Start Manual

6.3 HDMI Capture Use Case

Note: Only the Starter Kits – TDA3 Automotive and DM50x – support the HDMI Capture UseCase.
i. At main menu, press S to select System Settings.
ii. Press 2 for Capture Settings.
iii. In Capture Settings menu, press 2 to bring up:
iv. At the main menu, press 1 to select Single Camera Use-cases.
v. In the Single Camera Use cases menu, press 1 to bring up:
vi. For a full menu input sequence for this use case, see Table 8 (below):
2: HDMI Capture 1080P60 (Not Supported in TDA2x/TDA2Ex Multi-SerDes
board)
1: 1CH VIP capture + Display
Menu Input Selects Menu Option (runs HDMI Capture Use Case)
Characters
S Systems Settings
2 Capture Settings
2 HDMI Capture 1080P60 (Not Supported in TDA2x/TDA2Ex
Multi-SerDes board)
1 Single Camera Use-cases
1 1CH VIP capture + Display

Table 8. Full Menu Input Sequence for HDMI Capture Use Case

DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
www.d3engineering.com
- 32 -
CONFIDENTIAL ▪ 32
D3Engineering.com ▪ 585.429.1550
585.429.1550