(above) illustrates poor calibration. Note that in the upper right
Figure 11
camera, the red rectangles are not on the corners of the target, and many
cables (obstructions) are visible.
Figure 12 (below) indicates good calibration: The algorithm has found the
corners of the targets. Note the red dots at the corners of the black squares.
Figure 12. Red dots on corners of black squares indicating good calibration
viii.
With the calibration process complete, power cycle the TDA3x.
ix.
For the 3D SurroundView demo menu sequence, see Table 7 (below).
DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
Figure 11. Example of poor calibration and camera obstructions
- 30 -
CONFIDENTIAL ▪ 30
D3Engineering.com ▪ 585.429.1550
www.d3engineering.com
585.429.1550