D3 DesignCore RVP-TDA3 Series Quick Start Manual page 17

9. Connect the display to the RVP-TDA3x system using the provided cable 1000285, HDMI-
Mini HDMI. The full-size HDMI end of the cable plugs into the monitor, and the Mini
HDMI end plugs into the RVP-TDA3x system.
The monitor's other cable is the power cable. The monitor takes 12V DC from the power
supply provided in the monitor box. Locate the power port on the monitor, which is the
barrel jack at the very top of the monitor port panel.
a) HDMI connected
to back of
monitor
b) HDMI Mini
connected to
RVP-TDA3x
system
c) Monitor with
Power and HDMI
plugged in
DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
www.d3engineering.com
- 17 -
CONFIDENTIAL ▪ 17
D3Engineering.com ▪ 585.429.1550
585.429.1550