Tda3X Automotive Starter Kit And Dm50X Starter Kit: Hdmi Capture And Display - D3 DesignCore RVP-TDA3 Series Quick Start Manual

4.3 TDA3x Automotive Starter Kit and DM50x Starter Kit: HDMI Capture and Display

Note: Images shown are of TDA3x Automotive Starter Kit.
1. Connect the TDA3x system to a computer to access the debug Serial console. Connect
the provided USB-USB Micro B cable to the serial port, as shown below.
USB Micro B cable connected to the
Serial console debug port
2. Next, insert the provided Micro SD Card into the marked SD Card slot on the TDA3x
system, as shown below. The device will not boot without this card inserted.
Micro SD Card inserted into TDA3x
system
3. Connect an HDMI cable that is attached to a display to the TDA3x system in port labeled
HDMI OUT.
DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
- 20 -
CONFIDENTIAL ▪ 20
D3Engineering.com ▪ 585.429.1550
www.d3engineering.com 585.429.1550