Garmin GTX 330 Installation Manual page 37

5.2.10 OPERATION CONFIGURATION PAGES
VS RATE (Vertical Speed Rate)
This field is the typical vertical speed for climb/descent of the aircraft. This number determines when a climb or
descent arrow is displayed on the PRESSURE ALT page of the GTX 330. The range is 0 (zero) feet per minute to
9999 feet per minute. It is set to 500 fpm at the factory.
FORMAT (Altitude Format)
This field determines how the pressure altitude will be shown on the GTX 330 display.
Selection
FLIGHT LVL
(Flight Level)
FEET
METERS
VFR ID (VFR Transponder Code)
This field is the four-digit code that will be selected when the user presses the GTX 330 VFR key. In the United States, 1200 is
the VFR code for any altitude. It is set to 1200 at the factory.
ALTITUDE ALERT DEVIATION (Altitude Format)
This field determines the amount of altitude difference from selected altitude to generate an altitude alert deviation.
SQUAT SWITCH
The GTX 330 Flight Timer and the Auto Standby feature may be based
on the squat switch state. The squat switch field may be set to either YES or NO.
DELAY TIME
This is the number of seconds the aircraft must be on the ground before the AUTO STANDBY feature automatically
switches to standby mode when the airborne source is the squat switch. It has a range of 0 (zero) seconds to 99
seconds, and is set to 24 seconds at the factory.
AUTO FLIGHT TIMER
Available choices are YES or NO. Selecting YES starts the flight timer when the squat switch senses lift off.
Page 5-10
Rev. 1
Description
DEFAULT. The pressure altitude is displayed in hundreds of feet. For
example, a pressure altitude of 12,300 feet is displayed as "FL 123".
Pressure altitude is displayed in feet.
Pressure altitude is displayed in meters.
First CONFIGURATION Page
Second CONFIGURATION Page
GTX 330 Installation Manual
190-00207-02