Configuration Pages - Garmin GTX 330 Installation Manual

5.2

CONFIGURATION PAGES

Holding down the FUNC key and pressing the ON key provides access to the configuration pages. The FUNC key
sequences forward through the configuration pages. The START/STOP button reverses through the pages, stopping
at the Menu page. The CRSR key will highlight selectable fields on each page. When a field is highlighted, numeric
data entry will be performed with the 0 – 9 keys and list selections will be performed with the 8 or 9 keys. Press the
CRSR key to accept changes. Pressing the FUNC key moves on to the next configuration page without saving the
changes. Changes made through the configuration pages are stored in EEPROM memory. To exit the configuration
pages, turn the power off and then on again (without holding the FUNC key).
The configuration page sequence is as follows (menu categories are listed in parenthesis):
•
'Jump To' Menu
•
Audio and Messages (first and second pages)
•
Traffic Information
•
Display Mode
•
Display Backlight
•
Key Backlight
•
Contrast
•
ARINC 429 Input #1 (first I/O Configuration page)
•
ARINC 429 Input #2 (second I/O Configuration page)
•
ARINC 429 Output
•
RS232 Input
•
Operation Configuration #1 (first Aircraft Configuration page)
•
Operation Configuration #2 (second Aircraft Configuration page)
•
Temperature
•
Aircraft Address
•
Flight ID
•
Aircraft Type
•
Squat Switch Setup
•
Gray Code Input
•
External Switch State
•
Analog Input
•
RS232 Input Display
•
ARINC 429 Input Display #1
•
ARINC 429 Input Display #2.
Page 5-4
Rev. 1
GTX 330 Installation Manual
190-00207-02