Table of Contents
Advertisement
Installing Software for the PC
Under MS-DOS 5.0 and above, the AHA-2930B host
adapter can support up to seven other SCSI devices
without additional software. (Earlier versions of DOS
support up to two hard disk drives.) You need to install
additional software to support other kinds of SCSI
devices such as tape drives, CD-ROM drives, and
scanners.
If Adaptec EZ-SCSI
AHA-2930B, you should install it now. Adaptec
EZ-SCSI provides software driver support for your
host adapter and SCSI devices in computers running
under DOS, Windows
™
Windows NT
.
®
The Adaptec
7800 Family Manager Set provides
software driver support for the NetWare, OS/2, and
UNIX platforms.
If you purchased your host adapter from a third-
party vendor, you can use the drivers they provide.
(Refer to the third-party documentation for installa-
tion instructions and troubleshooting information.)
®
was included with your
®
®
, Windows 95
, and
Installing Software for the
Macintosh
Power Macintosh users with Mac OS (system 7.5.2 or
greater) can install the Board Control software that allows
you to change host adapter settings without opening the
computer case. This software is included on the Board
Control diskette. Copy the Board Control software to the
System folder/Apple Menu Items folder on your local
hard disk drive. See Using Board Control (Macintosh) on
page 7.
Congratulations!
You have completed the installa-
tion of your host adapter. For additional information on
configuring your host adapter, see Helpful Hints on
page 6.
5
Advertisement
Table of Contents
