Expand Device; Insert Micro Sd Card - Siemens SIMATIC IOT Operating Instructions Manual

Expand device

5.1

Insert Micro SD card

Requirement
● The device is disconnected from the power supply.
● Micro SD card that is suitable for industrial use.
Procedure
Installation
NOTICE
Inserting a memory card
If you are using the Micro SD card in a device installed in a system, you must observe the
safety regulations for work on electrical systems.
Carefully insert the Micro SD card into the Micro SD holder without applying excess force.
1. Open the cover on the right.
2. Carefully press the Micro SD holder
down and lift the holder forwards.
3. Push the Micro SD card correctly
aligned into the supporting frame. The
contacts of the Micro SD card must
point in the direction of the
motherboard.
4. Push the supporting frame back and
carefully push the supporting frame
upwards until it engages.
SIMATIC IOT2020, SIMATIC IOT2040
Operating Instructions, 10/2016, A5E37656492-AB
5
31