Identification Data Of The Device; Permitted Mounting Positions And Mounting Types - Siemens SIMATIC IOT Operating Instructions Manual

3.1.2

Identification data of the device

The device can be clearly identified with the help of this identification data in case of repairs
or theft.
You can find this information on the rating plate. The following illustration shows an example.
Example rating plate:
3.1.3

Permitted mounting positions and mounting types

The device can be attached horizontally or vertically on a DIN rail or to a wall.
Horizontal mounting position, preferred
Take into account the permitted temperature range for operation that depends on the
mounting position in accordance with the "Technical specifications (Page 45)" section.
SIMATIC IOT2020, SIMATIC IOT2040
Operating Instructions, 10/2016, A5E37656492-AB
Enter the identification data in the table below:
Order number
Serial number
Production version
All existing Ethernet
addresses (MAC)
Vertical mounting position
Installing and connecting the device
3.1 Preparing for installation
6ES ...
S VP
FS
21