Sharp DV-NC100S Service Manual page 104

Vcr/dvd combination
Hide thumbs Also See for DV-NC100S:
Table of Contents

Advertisement

Cleaning
Cleaning of Video Head
Clean the head with a head cleaning stick or chamois
cloth.
Procedure
1. Remove the top cabinet.
2. Put on a glove (thin type) to avoid touching the upper
and lower drum with your bare hand.
3. Put a few drops of 90% Isopropyl alcohol on the head
cleaning stick or on the chamois cloth and, by slightly
pressing it against the head tip, turn the upper drum
to the right and to the left.
Notes:
1. The video head surface is made of very hard material,
but since it is very thin, avoid cleaning it vertically.
2. Wait for the cleaned part to dry thoroughly before
operating the unit.
3. Do not reuse a stained head cleaning stick or a
stained chamois cloth.
Upper
Cylinder
Do Not !
Video Head
Cleaning Stick
Cleaning of ACE Head
Clean the head with a cotton swab.
Procedure
1. Remove the top cabinet.
2. Dip the cotton swab in 90% isopropyl alcohol and
Notes:
1. Avoid cleaning the ACE Head vertically.
2. Wait for the cleaned part to dry thoroughly before
Do Not touch
with your bare
hand!
2-1-2
clean the ACE Head. Be careful not to damage the
upper drum and other tape running parts.
operating the unit or damage may occur.
ACE Head
H9740MEN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-nc100ssDv-nc100sqDv-nc100syDv-nc100sr

Table of Contents