Central Pneumatic 93351 Assembly And Operating Instructions Manual

2.5 hp air compressor 29 gallon capacity

Advertisement

Quick Links

2.5 HP AIR COMPRESSOR
29 GALLON CAPACITY
ASSEMBLY AND OPERATING INSTRUCTIONS
Do to continuing improvements,
actual product may differ slightly
from the product described herein.
Visit our Web site at: http://www.harborfreight.com
Copyright
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Model 93351
Your Warranty Is Voided If:
A. You do not put compressor oil in the Compressor's crankcase prior to its first use.
Before each use, check the oil level. Never run the Compressor with low or no compres-
sor oil. Running the Compressor with low or no oil will permanently damage the unit.
B. You use an extension cord with the Air Compressor.
Connect the Air Compressor's Power Cord Plug directly to the nearest 120 volt, grounded,
electrical outlet. If necessary, attach a longer air hose to the Compressor.
C. You drop the Air Compressor.
Do not lift the Air Compressor using its Handle.
3491 Mission Oaks Blvd., Camarillo, CA 93011
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
2005 by Harbor Freight Tools
Cover Revised 05/06
WARNING!
. All rights reserved. No portion of this
®
®

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic 93351

  • Page 1 . All rights reserved. No portion of this © ® manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. Cover Revised 05/06...
  • Page 2: Product Specifications

    Keep bystanders, children, and visitors away while operating a power tool Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. For technical questions, please call 1-800-444-3353. SKU 93351 Page 2...
  • Page 3: Electrical Safety

    Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. For technical questions, please call 1-800-444-3353. SKU 93351 Page 3...
  • Page 4 “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. For technical questions, please call 1-800-444-3353. SKU 93351 Page 4...
  • Page 5: Specific Safety Rules

    Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment. Always wear ANSI-approved safety impact eye goggles when assembling and using the Air Compressor.
  • Page 6 Compressor, operator(s), and any additional tools and equipment. Keep all electrical connections dry and off the ground. Industrial applications must follow OSHA guidelines. REV 05/06 For technical questions, please call 1-800-444-3353. SKU 93351 Page 6...
  • Page 7 To extend the life of your tools and equipment, it is recommended that you install an oiler and water filter inline with the air output line of the Air Compressor. (See Figure A.) REGULATOR OILER WATER FIGURE A FILTER For technical questions, please call 1-800-444-3353. SKU 93351 Page 7...
  • Page 8: Grounded Tools: Tools With Three Prong Plugs

    The plug and outlet should look like those in the following illustration. (See Figure B.) THIS PRODUCT USES A 3-PRONG PLUG 120 VOLT, GROUNDED, ELECTRICAL OUTLET FIGURE B For technical questions, please call 1-800-444-3353. SKU 93351 Page 8...
  • Page 9: Double Insulated Tools: Tools With Two Prong Plugs

    GROUNDED, GROUNDED, ELECTRICAL OUTLET ELECTRICAL OUTLET FIGURE C SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes n 0 xxxx/min. No Load Revolutions per Minute (RPM) For technical questions, please call 1-800-444-3353. SKU 93351 Page 9...
  • Page 10: Assembly Instructions

    When unpacking, check to make sure all the parts shown on the Parts List on page 17 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
  • Page 11: Operating Instructions

    Connect an air hose (not included) to the Air Outlet Valve (69). Then, connect the other end of the air hose to the pneumatic tool (not included) that is to be used. (See Figure G.) For technical questions, please call 1-800-444-3353. SKU 93351 Page 11...
  • Page 12 Tank. (See Figure G.) FIGURE G ON/OFF KNOB (86) PRESSURE SWITCH BOX (66) AIR OUTLET VALVE (69) (CONNECT AIR HOSE HERE) PRESSURE REGULATOR (70) TANK PRESSURE GAUGE TANK (50) SAFETY VALVE (67) (65) For technical questions, please call 1-800-444-3353. SKU 93351 Page 12...
  • Page 13 (69), and store the air hose in a clean, dry, safe location out of reach of children. Allow the Air Compressor to completely cool. Then store the unit in a clean, dry, safe location out of reach of children. For technical questions, please call 1-800-444-3353. SKU 93351 Page 13...
  • Page 14: Inspection, Maintenance, And Cleaning

    Once drained, replace the Flange Head Bolt. Then, refill the crankcase to its proper oil level. (See Assy. Diagram.) To clean, wipe with a damp cloth, using a mild detergent or mild solvent. REV 05/06 For technical questions, please call 1-800-444-3353. SKU 93351 Page 14...
  • Page 15: Please Read The Following Carefully

    THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353. SKU 93351 Page 15...
  • Page 16: Troubleshooting

    Compressor to the pneumatic tool. Check all air fittings and connections for leaks. Air requirement of the tool exceeds the compressor’s capacity. See CFM output on page 2. For technical questions, please call 1-800-444-3353. SKU 93351 Page 16...
  • Page 17: Parts List

    Check Valve Hex Bolt Motor Stator Assy. Discharge Tube NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 05/06 For technical questions, please call 1-800-444-3353. SKU 93351 Page 17...
  • Page 18: Assembly Diagram

    ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 05/06 For technical questions, please call 1-800-444-3353. SKU 93351 Page 18...

Table of Contents