Recording; Clock - Philips FW-C150/37 Service Manual

20
MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3
CD
TUNING
SEARCH
DSC
PROGRAM
PLAY/ REC
TAPE 1
FULL AUTO STOP

RECORDING

21
Dubbing tapes
(from tape deck 2
to tape deck 1)
1 Load the prerecorded tape into tape
deck 2 and a blank tape into tape
deck 1.
• Make sure both tapes have their full
spool to the left.
2 Press PAUSE on tape deck 1.
3 Press RECORD on tape deck 1.
™ The
starts flashing.
REC
4 Press PLAYÉ on tape deck 2.
• Recording will start automatically.
5 Press STOP•OPEN on tape deck 1
and tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
FM•AM TAPE 1 • 2 VIDEO MASTER
VOLUME
TUNER TAPE AUX
▲
DEMO STOP PRESET
PLAY• PAUSE PREV NEXT
STOP• CLEAR

CLOCK

• TIMER
DYNAMIC BASS BOOST
DIGITAL SOUND CONTROL
Recording from other
sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to
start recording.
™ The
starts flashing.
REC
4 Press PAUSE to interrupt
recording.
5 Press STOP•OPEN on tape deck 1
to stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
2-8
RECORDING
Notes:
– For recording, use only tape of IEC type
I (normal tape).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
PLAYBACK
TAPE 2
• For One Touch Recording, as soon as
you press RECORD, the current
source (CD, TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recording.
™ The
starts flashing.
REC
3 Press PAUSE to interrupt
recording.
4 Press STOP•OPEN on tape deck 1
to stop recording.
MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3
CD
DSC
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
• Press CLOCK•TIMER briefly (on
the system only).
™ "10:38 or 22:38" (the
PM
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
CD Synchro Start
Recording
During CD synchro start recording,
• Do not fast forward/rewind your
tape in tape deck 2.
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If you do
not, the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD on tape deck 1 to
start recording.
™ The
starts flashing.
REC
4 Press STOP•OPEN on tape deck 1
to stop recording, then press Ç to
stop disc playback.
CLOCK
FM•AM TAPE 1 • 2 VIDEO MASTER
VOLUME
TUNER TAPE
AUX
▲
TUNING DEMO STOP PRESET
SEARCH STOP• CLEAR PLAY• PAUSE PREV NEXT
•
PROGRAM CLOCK TIMER DYNAMIC BASS BOOST
DIGITAL SOUND CONTROL
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. "12:00
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK•TIMER to select
clock mode.
2 Press PROGRAM to select 12- and
24- hour mode.
™ If 12-hour mode is selected,
"12:00" starts flashing and the
lights up.
AM
™ If 24-hour mode is selected,
"00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ëon the
system.
" or
AM