Table of Contents
Advertisement
OPERATING THE SYSTEM
14
DIM 3 - half brightness with Volume
Indicator Off
Sound Control
VOLUME ADJUSTMENT
Press MASTER VOLUME 3 or 4 to
increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the
socket at the front of the system.
The speakers will be muted.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to enjoy
special sound effects that have preset
equalizer settings, providing the best
music reproduction.
• Press DSC to select OPTIMAL,
JAZZ, ROCK or TECHNO.
™ "OPTIMAL, JAZZ, ROCK or
TECHNO" and the respective flag
will be displayed.
Note:
– When "OPTIMAL" sound is selected
DBB will be switched on automatically.
15
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable
and finalized digital audio CD-
Rewritable format discs.
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD changer tray slides out.
3 Load a disc with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button.
™ The CD changer tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN•CLOSE to close the
CD changer tray.
™ A lit on the respective CD
numeric flag indicates that its
corresponding disc(s) is loaded in
the disc tray.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass
response.
• Press DBB to switch on bass
response.
™ "DBB ON" and the DBB flag will
be displayed.
To switch off DBB
• Press DBB again.
™ "DBB OFF" will be displayed.
Note:
– Some discs or tapes might be recorded
in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound of the system without
switching off the system when you require
a moment of silence.
• Press MUTE on the remote control
to switch off the sound.
™ "MUTE" and the MUTE flag will be
displayed.
• Press MUTE again on the remote
control or increase the MASTER
VOLUME to switch on the sound.
Disc Direct Play
• You can play a disc directly by
pressing the DISC 1, DISC 2 or
DISC 3 button. The CD player will
stop at the end of playback of the
selected disc.
™ The corresponding CD numeric
flag starts to flash.
Playing a Disc
1 PressÉ to start playback.
™ A flashing on the CD numeric flag
indicates the selected disc.
™ The track number and elapsed
playing time of the current track
appear on the display.
• To interrupt playback, pressÅ.
™ The playing time flashes.
• To resume playback, press É again.
2 To stop playback, press Ç.
Note:
– All the available discs will play once,
then stop.
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing.
1 Press DISC CHANGE.
™ The CD changer tray slides out.
2 Replace the discs in the left and right
disc trays.
2-5
DISC 1
DISC CHANGE
C H A N G E R
MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3
CD
TUNING
SEARCH
DSC
PROGRAM
Warning!
1) This system is designed for conventional discs. Do not use any
accessories such as disc stabilizer rings or disc treatment sheets, etc.,
which may damage the disc mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with discs, do not turn over or shake the
system. This may jam the changer.
You may load three discs in the CD changer for continuous playback
without interruption.
CD
• If you wish to change the inner disc
during playback, press DISC
CHANGE again.
™ "DISC CHANGE" will be
displayed.
™ The disc will stop playing.
™ The CD changer tray will close to
retrieve the inner disc and then
open again with the inner disc
accessible.
3 Press OPEN•CLOSE to close the
CD changer tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1 Press í or ë until the desired
track appears on the display.
2 PressÉ to start playback.
™ The selected track number and
elapsed playing time appear on
the display.
Selecting a desired track during
playback
• Press í or ë until the desired
track appears on the display.
™ The selected track number and
elapsed playing time appear on
the display.
• If you press í once it will skip to
the beginning of the current track
and play the track again.
CD
DISC 2
DISC 3
OPEN • CLOSE
FM•AM
MASTER
TAPE 1 • 2
VIDEO
VOLUME
TUNER
TAPE
AUX
▲
DEMO STOP
PRESET
STOP• CLEAR
PLAY• PAUSE PREV
NEXT
CLOCK
•
TIMER
DYNAMIC BASS BOOST
DIGITAL SOUND CONTROL
Note:
– Pressing í during shuffling can only
skip to the beginning of the current
track.
Searching for a particular
passage during playback
• Press and hold à or á until the
desired passage is located.
™ The volume will be reduced.
• Play returns to normal when à or
á is released.
Programming Tracks
Programming tracks of a loaded disc is
possible when playback is stopped. The
display will indicate the total tracks
stored in the program. Up to 40 tracks
can be stored in the memory in any
order. When 40 tracks are stored and
you attempt to store another track, the
display will show "FULL".
1 Load the desired discs in the disc
trays.
2 Press PROGRAM to start
programming.
™ The PROG flag starts flashing.
™ A flashing on the CD numeric flag
indicates the selected disc.
3 Press the CD (CD 1•2•3) or DISC
1/2/3 button to select the disc.
4 Pressí or ë to select the desired
track.
Advertisement
Table of Contents
