Table of Contents
Advertisement
Dismantling of Assemblies on the Front Panel
1) Remove 1 screw C to loosen the Headphone board.
2) Remove 12 screws D as indicated to loosen the Front
board.
3) Remove 6 screws E to loosen the ECO-MTF Module
3-2
Dismantling of Rear Portion
1) Remove 1 screw H & uncatch C1 to loosen the Mains
socket board.
2) Remove 2 screws F, 2 screws G and uncatch C2 to
loosen the Tuner board assembly.
3) Remove 5 screws J (3x on the rear and 2x on the
heatsink) to loosen the Combi board (Main part).
4) Remove 2 screws K to loosen the Mains Transformer.
3-2
Advertisement
Table of Contents
