Table of Contents
Advertisement
104
8
Press <Enter> to end the array configuration.
9
Select YES to save the configuration and press any key to return to
the Configuration menu.
10 Press <Esc> to return to the Management Menu.
Initialing a RAID volume
1
Select Initialize from the Management menu. All logical drives
should be listed under Logical Drives.
2
Press the space bar to select drives for initialization. The selected
drive will be shown in yellow.
3
After selecting the drives, press <F10> and select YES to start the
initialization process.
4
When initialization is complete, press <Esc> to continue.
5
Press <Esc> to return to the Management Menu.
Assigning a hot spare disk
1
Select Objects from the Management menu.
2
Select Physical Drive from Objects. All of the HDDs will be listed.
3
Select a drive marked as READY and press <Enter>.
4
Select Make Hot Spare and press <Enter>.
5
Select Yes and the selected drive changes from READY to HOTSP.
6
Press <Esc> to return to the Management Menu.
Saving and Exiting the RAID Configuration Utility
1
After performing RAID configuration, initialization and assigning
the hot spare disk, press <Esc> in the Management Menu and
select YES to exit the RAID Configuration Utility.
2
Press <Ctrl> + <Alt> + <Del> to reboot the server.
3
Now you can start to install the operating system.
Appendix A Server management tools
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
