Table of Contents
Advertisement
10 PROGRAMMING
Note. Access to the programming pages is possible only with Range 1 selected.
10.1 Access to Secure Parameters
A 5-digit code is used to prevent unauthorized access to the secure parameters.
SECURITY CODE
10.2 Language Page
English
28
Security Code
Enter the required code number, between 00000 and 19999, to gain access to the
secure parameters. If an incorrect value is entered, access to subsequent programming
pages is prevented and the display reverts to the
Note. The security code is preset at '00000' to allow access during commissioning but
should be altered to a unique value, known only to authorized operators – see Alter
Security Code parameter in Set Up Outputs Page.
Advance to
.
Language Page
Language Page
Select the required language for the display.
Advance to
Set Up Outputs Page
Operating Page
.
.
Advertisement
Table of Contents
