4.1.4 Cubicle Mounted System – Figs 4.4 and 4.5
The cubicle must be located in a safe area of the application plant and mounted either on the base using four M10 fixings or to a
vertical surface using the four fixing brackets on the back-plate.
Overall dimensions of the cubicle are given in Fig. 4.4 and the principal base case components are shown in Fig. 4.5.
Dimensions in mm (in.)
478
(18.8)
382
(15.04)
4 Mounting Brackets
Ø10 (0.39) hole
140 (5.53)
80 (3.15)
Cubicle sealed to IP55
Weight of cubicle assembly 56kg (123lb) max.
Note. Isolator and MCBs not fitted to AK102 versions
(can be fitted to AK103 versions if specified).
630 (24.8)
600 (24.6)
2 3
1
95.0
%H2 IN AIR
2 3
1
95.0
%H2 IN CO2
Hydrogen Purity
& Purge Gas Monitor
340 (13.4)
Fig. 4.4 Installation Dimensions – Cubicle
110
(4.33)
80
(3.15)
ø12 (0.47)
Hazardous Area
Cable Glands
Mains Power
Cable Glands
Safe Area
Cable Glands
Optional Mains Isolator
(not fitted to those systems that
require 100% redundancy)
4 MECHANICAL INSTALLATION...
515 (20.28)
40
(1.57)
11