Onboard Leds - Asus ROG STRIX B360-H GAMING Manual

1.1.7

Onboard LEDs

1. Q LEDs (CPU, DRAM, VGA, BOOT)
Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING
CPU/DRAM/BOOT_DEVICE/VGA LED
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
2. Standby Power LED
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING Standby power LED
ROG STRIX B360-H GAMING
BOOT (YELLOW GREEN)
VGA (WHITE)
DRAM (YELLOW)
CPU (RED)
SB_PWR
ON OFF
Standby Power Powered Off
1-9