Asus ROG STRIX B360-H GAMING Manual page 26

7. CPU, CPU optional, and chassis fan connectors; AiO pump connector (4-pin
CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-2; 4-pin AIO_PUMP)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING Fan connectors
•
•
Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP header,
and connect the fan cables to the CPU_FAN and/or CPU_OPT header(s).
1-14
A
B
C
D
E
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
Ensure that the CPU fan cable is securely installed to the CPU fan connector.
CPU_FAN CPU_OPT
A B
AIO_PUMP CHA_FAN1
C D
Chapter 1: Product Introduction
CHA_FAN2
E