Asus ROG STRIX B360-H GAMING Manual page 24

4. USB 3.1 Gen 1 connector (20-1 pin U31G1_56)
This connector allows you to connect a USB 3.1 Gen 1 module for additional USB
3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can
enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to
5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency,
and backward compatibility with USB 2.0.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING USB 3.1 Gen 1 connector
The USB 3.1 Gen 1 module is purchased separately.
5. USB 2.0 connectors (10-1 pin USB914, USB1011)
These connectors are for USB 2.0 ports. Connect the USB module cable to these
connectors, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s
connection speed.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING USB2.0 connectors
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
1-12
U31G1_56
PIN 1
Vbus
Vbus IntA_P1_SSRX-
IntA_P2_SSRX- IntA_P1_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P2_SSTX- IntA_P1_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P1_D-
IntA_P2_D- IntA_P1_D+
IntA_P2_D+ GND
USB1011 USB914
PIN 1 PIN 1
Chapter 1: Product Introduction