Advertisement
AutoVIEW IR Sensor Kit
Unpacking:
Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts:
One (1) AutoVIEW Active IR Sensor (modified Optex with RJ-45 connector to support Cat-5e cabling)
One (1) Dark Acrylic Lens Cover
One (1) AutoVIEW Control Interface with 2-pin Phoenix type connector
One (1) 18VDC, 2.75 Amp Switching Power Supply
One (1) Power Cord (International version ships with UK and Euro power cables)
Installation:
Installation of the AutoVIEW IR Presenter Camera Control System is as unique as it is simple. With any Vaddio
product, understanding the key system components is essential.
IR Sensors:
The Optex OA-70CS sensors provided with the AutoVIEW IR Sensor Kit are active infrared sensors using near
infrared reflection to actively sense the presence of something or someone within the sensing zone. Much like
automatic door sensors for grocery or department stores, the sensors detect the presence of a person within a
zone which can be tuned for the specific environment in which it operates. The Optex owner's manual provided
with each sensor details the installation and proper adjustment of the sensor.
AutoVIEW IR Sensor Dimensions and Features:
Modified to RJ-45
AutoVIEW IR Sensor Kit Manual 341-233-1 Rev. C
Page 4 of 8
Advertisement
