Speed Limit Control; Units Default Setting; Displays; Grade - Quinton MedTrack CR60 User Manual

Displays

MedTrack Rehabilitation Treadmills User Guide

Speed Limit Control

You can set a maximum speed for treadmill use, which is
especially useful for unmonitored treadmills.
Use the following procedure to limit the speed:
1. Simultaneously press and release
.
Select
2. Use the and
Faster
desired limit.
3. Press Select .
To deactivate the speed limit:
1. Simultaneously press and release
.
Select
2. Use the key to set the speed to the highest level.
Faster
3. Press .
Select

Units Default Setting

To change the default setting for the Units command:
1. Be sure the
Power
2. Press and hold the
3. While pressing
Units
but continue pressing
The controller has three displays: grade, speed, and
multifunction.

Grade

The Grade display shows the current grade until you press the
or key, then it displays the target grade as it adjusts
Up Down
to the change.
Stop Belt
keys to set the speed to the
Slower
Stop Belt
key on the controller is off.
key.
Units
, press . Release the
Power
until the self test is finished.
Units
Controls, Displays, Indicators D-5
, , and
Cool Down
, , and
Cool Down
key
Power