Gree GWH18MC-K3DNA2G Service Manual page 97

8. Remov e
Cut off Valve and
Remove the 2 bolts fixing the valve subassemblies.
Unsolder the welding joint connecting the gas valve
and the return air pipe. Remove the gas valve.
(Note: When unsoldering the soldering joint, wrap the
gas valve with wet cloth completely to avoid damage
to the valve caused by high temperature.)
Unsolder the welding joint connecting the liquid valve
and the connecting pipe.Remove the liquid valve.
Remove screws fixing valve support and then remove
the valve support; remove the screw fixing the
condenser and then pull the condenser upwards to
remove it.
9. Remov e compressor
Remove the 3 foot nuts fixing the compressor
and then remove the compressor.
10.Remove support
Remove the screws connecting the support
and condenser assy,and thenremove the support.
94
Valve Support
support
Service Manual
Cut off Valve
Valve Support
compressor
Installation and Maintenance