Gree GWH18MC-K3DNA2G Service Manual page 87

Steps
9. Remove stepping motor
Remove the screw fixing step motor and
then remove the step motor.
10. Remove motor and cross flow blade
a
Remove the screws fixing motor clamp
and then remove the motor clamp.
b Remove the screw at the connection
place of cross flow blade and motor; lift
the motor and cross flow blade upwards
to remove them.
c Remove the bearing holder sub-assy.
84
Procedure
Screw
Holder sub-assy
Step motor
Screws
Motor clamp
Cross flow
Motor
Bottom case
Installation and Maintenance
Service Manual