24K
Electric heater band is not shown.
Steps
1. Remove top panel
Twist off the screws used for fixing the handle and
a
v alve cover , pull the handle and v alve cover up
ward to remove it.
b
Remove the 3 screws connecting the top
panel with the front panel and the right side
plate, and then remove the top panel.
2. Remove grille,front side plate and panel.
a
Remove
the 2 screws connecting the grille
and the panel, and then remove the grille.
b
Remove the 1 screw connecting the front side
plate and the panel,and then remove the front
side plate.
90
Procedure
grille
front side plate
Service Manual
handle
valve cover
top panel
Installation and Maintenance