Kenwood KW-V940BW Instruction Manual page 18

Monitor with dvd receiver, monitor with receiver
Table of Contents

Advertisement

Disc
• [Hide]: Hides the control screen.
• [
] : Repeats the current content. Each time
you touch the key, repeat modes are switched
in the following sequence;
DVD: Title repeat (
(
), Repeat off (
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat (
(
)
Function panel
2
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• I]: Stops playback. Touching twice will play
the disc from the beginning when you play it
next time.
• [
]: Fast-forwards or fast-backward the
] [
disc. Each time you touch the key, the speed
changes. 2 times, 10 times.
• [
] (DVD only): Plays in slow motion
] [
forward or backward.
• [SETUP] (DVD only): Touch to display the DVD
SETUP screen. See DVD Setup (P.22).
• [MENU CTRL] (DVD only): Touch to display
the DVD-VIDEO disc menu control screen. See
DVD Disc Menu Operation (P.21).
• [PBC] (VCD only): Touch to turn Playback
control (PBC) on or off.
• [Audio] (VCD only): Touch to change audio
output channels.
Play mode indicator/ Playing time
3
• D, B, I, etc.: Current play mode indicator
Meanings of the icons are as follows: D (play),
B (fast forward), A (fast backward),
I (stop),
(resume stop), H (pause),
R
playback),
(slow reverse playback).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position.
Operation keys
4
• [E] [F] : Searches for the previous/next
content.
Touch and hold to fast-forward or fast-
backward the disc.
• [DH] : Plays or pauses.
• [
] : Touch to attenuate/restore the sound.
18
), Chapter repeat
)
), Repeat off
(slow
Indicator Items
5
• [IN]: Disc insertion status.
White: A Disc is inside the unit.
Orange: Disc player failure.
VCD
• [1chLL/2chLL]: Identifies the left audio output
of channel 1 or 2.
• [1chLR/2chLR]: Identifies the monaural audio
output of channel 1 or 2.
• [1chRR/2chRR]: Identifies the right audio
output of channel 1 or 2.
• [1chST/2chST]: Identifies the stereo audio
output of channel 1 or 2.
• [LL]: Identifies the left audio output.
• [LR]: Identifies the monaural audio output.
• [RR]: Identifies the right audio output.
• [ST]: Identifies the stereo audio output.
• [PBC]: The PBC function is on.
• [VER1]: The VCD version is 1.
• [VER2]: The VCD version is 2.
Searching area
6
Touch to search for the next/previous content.
Key display area
7
Touch to display the control screen.
[MENU CTRL] (DVD only)
8
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation
(P.21).
NOTE
• The control screen disappears when no operation
is done for 5 seconds.
• If you use a remote control, you can jump directly
to the desired image by entering the chapter
number, scene number, play time, etc. (P.83).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-m845bw

Table of Contents