Atag ZX4611D Instructions For Use Manual page 32

CLEANING
EN 32
Note! The oven space and an enamelled baking tray cannot be cleaned
at the same time using the pyrolysis function. If you want to clean an
enamelled baking tray using pyrolysis, then do this first (the oven space
can become dirty due to the cleaning of the baking tray). Insert one
baking tray at a time. After that, the oven space can be cleaned.
Caution! Do NOT clean the glass baking tray using the 'Pyrolysis'
oven feature.
Starting the Pyrolysis function
1. Make sure the oven space is completely empty and no chunks of
food and fat are present!
2. If you want to clean an enamelled baking tray first, place the special
pyrolysis guide rails in position. Wipe the baking tray with a damp
cloth and slide the baking tray into the oven on Level 2.
▷ Remove these special pyrolysis guide rails after the
cleaning process.
3. Select 'Pyrolysis' with the function knob.
4. Select the desired cleaning intensity:
▷ Low: approximately 3 hours
▷ Average: approximately 3,5 hours
▷ High: approximately 4 hours
Only the cleaning intensity can be selected. The time is fixed and
depends on the selected cleaning intensity.
5. Press on the confirm button to start pyrolysis clean.
• After a certain period the oven door will be locked automatically for
your own safety (once the temperature reaches 250 °C).
An unpleasant smell may be released from the oven during the
cleaning process.
• The oven door can be opened once the appliance has cooled down
(after the end of the pyrolysis cleaning).
• When the oven has cooled down, wipe with a damp cloth. Wipe the
oven door and the adjacent surfaces around the door seal. Do not
rub the seal.