Operation; Connecting Devices; Connecting A Computer; Specifications - Tripp Lite AG-01FD Series Owner's Manual

Operation

Connecting Devices

Using a user-supplied or device manufacturer's
shielded USB cable, insert the USB A
connector into any of the USB charger/hub's
ports. Additional premium-quality USB cables
in various lengths and connector types are
available at www.tripplite.com.
Note: Both charge-only and charge/sync USB are
supported.
Note: A computer connection is not required when
only using the charging function.

Connecting a Computer

In addition to device charging, the USB
charger/hub is equipped with a hub function
that syncs devices and their respective
software applications via a connected
computer. To enable the hub function, use the
included USB cable to connect the USB B
connector into USB charger/hub's Computer
Sync Port and the USB A connector into a
computer's USB port.
Note: When a computer connection is established
and multiple devices are connected to the USB
charger/hub, the charge rate will reduce during
syncing and resume to the normal charge rate upon
completion.
Note: The Firmware Upgrade Port requires a mini-USB connection (cable not included). To download the most
recent firmware updates, go to www.tripplite.com/support.

Specifications

Ports
Transmission Speed
Power Requirement
Operating Temperature
Operating Humidity
Dimensions (H x W x D)
Enclosure Material
Standards
Specifications are subject to change without further notice.
16-02-305-93358F.indb 5
U280-016-RM2U
16 x USB 2.0 Type A
1 x USB 2.0 Type B
1 x USB 2.0 5-Pin Mini-B
Input: 110-120V 4A/8A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB port)
32° to 95° F / 0° to 35° C
5 to 95% RH, Non-Condensing
3.4 (2U) x 17.5 x 12 in. / 8.6 (2U) x 44.5 x 30.5 cm
Tested to UL 60950-1: 2007 (US and Canada), NOM (Mexico) and RoHS
5
U280-032-RM Shown
U280-032-RM Shown
U280-032-RM
32 x USB 2.0 Type A
1 x USB 2.0 Type B
2 x USB 2.0 5-Pin Mini-B
Up to 480 Mbps
Metal
4/1/2016 12:15:43 PM