Table of Contents
Advertisement
Operation
Port Selection
All port switching operations begin by tapping the Scroll Lock key twice.
Hotkey
[Scroll Lock]
[Enter]
[Scroll Lock] +
[n] [Enter]
Note: If using the Scroll Lock key conflicts with other programs running on the
computer, the Ctrl key can be used instead.
Invoking Hotkey Setting Mode
All hotkey operations begin by holding the Num Lock key, pressing and
releasing the [-] key, then releasing the Num Lock key.
Note: If using [Num Lock] [-] conflicts with other programs, [Ctrl] [F12] can be
used instead.
Auto Scanning
Hotkey
[Scroll Lock] [Scroll Lock] [A]
[Enter]
[Scroll Lock] [Scroll Lock] [A]
[n] [Enter]
Note: To exit Auto Scan, press [Esc] or [Spacebar]. Auto Scanning stops when
you exit Auto Scan mode.
Action
Brings the KVM and Audio focus from the
port that currently has the KVM focus to
the next port on the installation (1 to 2; 2
to 3; 3 to 4; 4 to 1)
Note: If the KVM and Audio focus are on
different ports, only the KVM focus switches.
Brings the KVM and Audio focus to the
computer attached to the corresponding
Port ID.
Note: Replace [n] with the port number (1, 2,
3, 4).
Action
Starts Auto Scan. The KVM focus cycles
from port to port at 5-second intervals.
Starts Auto Scan. The KVM focus cycles
from port to port at n-second intervals.
Note: Replace n with a number between
1 and 99.
5
Advertisement
Table of Contents
