Table of Contents
Advertisement
14. Date/Time
The Date/Time page sets the date and time parameters for the KVM switch.
14.1 Time Zone
• From the drop-down menu at the top of the section, select the Time Zone and City that most closely resembles where the KVM switch is
located.
• If your area uses Daylight Savings Time, check the Daylight Savings Time box.
To manually set the date and time:
1. In the Date section, select the current month from the drop-down menu.
2. If needed, click the < or > buttons in the Date section to move backward or forward to the correct year.
3. In the calendar in the Date section, click on the current day.
4. In the Time section, enter the current time using the 24 hour HH:MM:SS format.
5. Click the Set button in the Time section to apply changes.
14.2 Network Time
To have the time automatically synchronized to a network time server, do the following:
1. Check the Enable Auto Adjustment box.
2. Select a time server from the Preferred Time Server drop-down list or check the Preferred Custom Server IP box and enter the IP of your
preferred time server.
3. If desired, repeat step two to enter an Alternate Time Server.
4. Enter the desired number of days between synchronization in the Adjust Time Every __ Days field.
5. Click the Adjust Time Now button to synchronize immediately.
77
Advertisement
Table of Contents
