Table of Contents
Advertisement
Figure of projected image and throw distance
Note
f This illustration is prepared on the assumption that the projected image size and position have been aligned to fit full in the screen.
SH
SW
SD
H
L
(LW/LT)
*1
*2
L1
*1 For details about calculating the projection distance, refer to "Formula for calculating the projection distance per projection lens" (x page 45).
*2 LW: Minimum projection distance when the Zoom Lens is used
LT: Maximum projection distance when the Zoom Lens is used
Projection lens Model No.
Standard zoom lens/
ET-DLE170
ET-DLE055
ET-DLE060
ET-DLE085
ET-DLE105
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
Note
f For the adjustment range of the projected image position with the lens shift, refer to "Lens shift range" (x page 71).
Chapter 2 Getting Started — Setting up
Projected image
SW
Projected image height
Projected image width
Projected image size
Distance from the lens center to the bottom edge of the projected image
Projection distance (distance from the front end of the projection lens to the screen)
Lens protrusion dimension (distance from the front surface of the projector to the front end of the projection
lens)
Lens protrusion dimension (L1) (approximate value)
Screen
L (LW/LT)
L (LW/LT)
Screen
0.043
0.027
0.104
0.084
0.088
0.044
0.045
0.051
0.095
L1
L1
(Unit: m)
ENGLISH - 37
Advertisement
Table of Contents
