Table of Contents
Advertisement
Note
f Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed
depending on the connected devices or contents being played back.
f [CLOSED CAPTION SETTING] can be selected only when NTSC or 480/60i YC
f If [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption
function to be connected or contents to be used.
f If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [DISPLAY SETTING] is not
displayed.
f Closed captions are not displayed when the menu screen is displayed.
[IMAGE ROTATION]
Set whether to rotate the input image when projecting.
1)
Press as to select [IMAGE ROTATION].
2)
Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[CLOCKWISE]
[COUNTERCLOCKWISE]
Note
f [IMAGE ROTATION] is disabled during P IN P.
f The on-screen display direction does not change even when this item is set to anything other than [OFF]. Set the [DISPLAY OPTION] menu
→ [ON-SCREEN DISPLAY] → [OSD ROTATION] as required.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1)
Press as to select [BACK COLOR].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create and register the [USER LOGO] image, use "Logo Transfer Software".
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
[STARTUP LOGO]
Set the logo display when the power is turned on.
1)
Press as to select [STARTUP LOGO].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[NONE]
Note
f When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f To create and register the [USER LOGO] image, use "Logo Transfer Software".
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
f When the [PROJECTOR SETUP] menu → [QUICK STARTUP] is set to [ON], the startup logo is not displayed when the projection is started
before the specified time has elapsed after going into the standby mode.
The specified time is the time set in the [PROJECTOR SETUP] menu → [QUICK STARTUP] → [VALID PERIOD].
Chapter 4 Settings — [DISPLAY OPTION] menu
Projects the input image without rotating.
Rotates the input image by 90° clockwise and project it.
Rotates the input image by 90° counterclockwise and project it.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
C
signal is input.
B
R
ENGLISH - 113
Advertisement
Table of Contents
