Cleaning And Care - Vitek VT-1331 Manual Instruction

•
•
•
•
•
•

CLEANING AND CARE

•
•
•
•
STORAGE
•
•
•
•
DELIVERY SET
Hair straightener – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 40 W
T-1331.indd 7
handle (6) only, do not touch the straightener body,
the body edges and the heating plates (1).
Wait for several seconds and slide the straighten-
er throughout the hair length, slightly pressing the
plates.
Repeat the procedure until you finish straightening
your hair.
After finishing the hair straightening procedure, switch
the unit off by pressing and holding down the ON/OFF
button (5) for 2-3 seconds, the temperature indication
on the display (2) will go out.
Unplug the unit.
Hang the unit on the loop (8) and let it cool down
completely.
Press the plates (1) together and set the lock (7) to the
position to fix them.
Before cleaning, unplug the unit, hang it on the loop
(8) and let it cool down completely.
Do not immerse the body, the power cord and the
power plug of the unit into water or other liquids.
Wipe the outer surface of the body and the heating
plates (1) with a soft damp cloth.
Do not use abrasives and solvents to clean the unit.
Let the unit cool down completely and make sure that
the unit body is clean and dry before taking it away.
Press the plates (1) together and set the lock (7) to the
position to fix them.
Never wind the power cord around the unit, as it can
damage the cord.
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
ENGLISH
7
10/13/20 1:04