Installation-Electrical And Ice Machine Assembly - Ice-O-Matic CD40030 Service & Installation Manual

Installation – Continued
The dispenser is supplied with a power cord. Do not use with an extension cord. The unit
must be plugged into a properly grounded outlet.
The dispenser must be installed so that it is a separate piece of equipment from the ice
machine. The drains and electrical supply must be separate.
Follow All Local, State and National Codes
Ice Machine
All models: Place the dispenser in the location where it will be
used. Level the top edge of the dispenser front to back and left to
right.
Sanitize the dispenser bin with a locally approved sanitizer.
See page 12.
Place the ice machine on the dispenser and secure it to the
dispenser with the hardware and bracket from the dispenser.
Install it according to the instructions in the manual included with
the ice machine.
Caution: Do not use
a condensate pump
in place of a floor
drain.
Route drains separately to a floor drain. Rear View of Typical Installation
Page 9
CD40030/CD40022