Disk Drives - Acer Power SC Service Manual

Disk Drives

Select Disk Drives from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
Diskette Drive A .................................................... [1.44MB 3.5-inch]
Diskette Drive B .................................................... [None]
! IDE Primary Channel Master
! IDE Primary Channel Slave
! IDE Secondary Channel Master
! IDE Secondary Channel Slave
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Diskette Drive A / B
IDE Primary Channel Master
IDE Primary Channel Slave
IDE Secondary Channel Master
IDE Secondary Channel Slave
30
Disk Drives
Description
Allows you to configure your floppy drive
Allows you to configure the hard disk drive
connected to the master port of IDE channel 1.
Lets you configure the hard disk drive connected
to the slave port of IDE channel 1.
Allows you to configure the hard disk drive
connected to the master port of IDE channel 2.
Lets you configure the hard disk drive connected
to the slave port of IDE channel 2.
Options
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44 MB, 3.5-inch
2.88 MB, 3.5-inch
Chapter 2