Hardware Specifications And Configurations - Acer Power SC Service Manual

Hardware Specifications and Configurations

Processor
Item
Type
Socket
Speed
Minimum operating speed
Voltage
BIOS
Item
BIOS code programmer
BIOS version
BIOS ROM type
BIOS ROM size
BIOS ROM package
Support protocol
Boot from CD-ROM feature
Support to LS-120 drive
Support to BIOS boot block feature
NOTE: The BIOS can be overwritten/upgraded using the AFLASH utility (AFLASH.EXE).
BIOS Hotkey List
Hotkey
+ +
F8
Chapter 1
AcerPower Sx: Intel Pentium III, Celeron or Cyrix III processor
AcerPower Sc: Intel Tualatin Pentium III, Celeron processor
370
AcerPower Sx: 500/550/600 MHz, 533/667/733 MHz
AcerPower Sc: Coppermine up to 1.1 GHz
0 MHz (If Stop CPU Clock in Sleep State in BIOS Setup is set to
Enabled.)
Processor voltage can be detected by the system without setting any
jumper.
Acer
AcerPower Sx :V4.0, R01-A4
AcerPower Sc : R07-B3
Bulk mode flash ROM
AcerPower Sx: 256Kbyte
AcerPower Sc: 4MB
32-pin DIP package
PCI 2.2, APM1.2, DMI 2.00.1, E-IDE, ACPI 1.0, ESCD 1.03, ANSI
ATA 3.0, PnP 1a, Bootable CD-ROM 1.0, ATAPI
Yes
No
No
Function
Enter BIOS Setup Utility
Enable hidden page of BIOS Setup
Utility
Specification
Tualatin from 1.2 to 1.4 GHz and above
Celeron 850/950 MHz , 1.1/1.2 GHz
Specification
Description
Press while the system is booting to enter
BIOS Setup Utility.
Press in BIOS Setup Utility main menu
screen, the Advanced Options menu then
appears.
The items on the Advanced Options menu
are:
Memory/Cache Options
PnP/PCI Options
11