HDD Module Installation
1. Install HDD module into slots (J) on front cover. (Figure 3-26)
Figure 3-26. Slots on Front Cover
2. Align ground cable (C) to screw hole on HDD module.
3. Install and secure screw (B) to ground cable and HDD module.
4. Secure HDD cables (D) and (G) to guides (H) on front cover.
5. Connect the following cables:
HDD cable (D) to mainboard connector (E)
HDD cable (G) to mainboard connector (F)
6. Install rear cover.
Machine Maintenance Procedures
ID
Size
B
M3.0x4.0
0
J
(Figure
Quantity
1
3-25)
Screw Type
3-27