HDD Module Removal
Prerequisite:
1. Locate HDD module (A) on front cover. (Figure 3-25)
Figure 3-25. HDD Module
2. Disconnect the following cables:
HDD cable (D) from mainboard connector (E)
HDD cable (G) from mainboard connector (F)
3. Remove HDD cables (D) and (G) from guide (H).
4. Remove screw (B) from ground cable (C) on HDD module.
5. Slide and remove HDD module.
3-26
Rear Cover Removal
A
0
B
C
H
Machine Maintenance Procedures
E
D
G
F
Need help?
Do you have a question about the Aspire Z3801 and is the answer not in the manual?