Advertisement
The following descriptions refer to INCLUDED IN PACKAGE items drawings on the previous page:
1. LED Strobe Trigger main unit
2. Spongy LED trigger ports
3. USB cable
IDENTIFICATION OF MAIN UNIT PARTS
2
3
1. Indicator light
2. LED cable port
3. 5V DC port
INSTRUCTIONS FOR USE
1. Charging the FA-2 LED Strobe Trigger main unit:
a. Connect the micro-USB end of the USB cable to the main unit's 5V DC port (Fig.1).
b. Connect the other end of the USB cable to a USB port or USB charger (Fig.2).
c. The unit should start charging and the indicator light should start flashing green (Fig.3).
d. When charging is complete, the indicator light stops flashing and remains green.
2
1
4
4. Rubber band
5. LED cable
5
4. Hot-shoe connector
5. Power switch
6. LED cable port
Fig.1
Fig.2
FA-2 LED Strobe Trigger Instruction Manual 20170607
6
Fig.3
Advertisement
