The FA-2 LED Strobe Trigger triggers underwater strobes
and flashes to fire in sync with the camera using fiber optic
cables. Using the LED Strobe Trigger eliminates the need
for the camera built-in flash to fire, thereby extending
camera battery life and allowing for longer shooting
sessions. Eliminating the camera built-in flash also keeps
the camera from heating up, resulting with less
condensation in humid conditions. The LED Strobe Trigger's
super quick recycle time allows for rapid shooting and
triggering of the strobes without having to wait for the
camera built-in flash to charge.
COMPATIBILITY
The FA-2 LED Strobe Trigger can be connected to any camera featuring a hot-shoe connection. It was
designed to be installed inside Fantasea housings, but can also be installed inside other housings featuring
sufficient space above the camera hot-shoe. For universal LED Strobe Triggers compatible with a wider
range of housings, please visit the Fantasea website –
The FA-2 LED Strobe Trigger is capable of triggering most underwater strobes available in the market. Note
that when using the LED Strobe Trigger, strobe output is controlled manually only.
SPECIFICATIONS
LED type: Ultra bright white LED
LED ports: 2
Voltage: 3.7 V
Power consumption: 5 milliwatt
Battery: 110mAh Lithium Polymer battery
Charging time: 1.5 hours
Flash capacity: 10,000 (when fully charged)
INCLUDED IN PACKAGE
1
1
Fantasea Line
FA-2 LED Strobe Trigger
Instruction Manual
2
4
(Cat. No. 6552)
www.fantasea.com
Battery life: Up to 72 hours (when fully charged)
Auto power-off time: 3 hours
Dimensions: 40.5 x 45 x
inch
Weight: 16.8 g / 0.59 oz
Included in package: LED Strobe Trigger main
unit, LED cable, Spongy LED trigger ports, rubber
band and USB cable
3
5
FA-2 LED Strobe Trigger Instruction Manual 20170607
20.5 mm / 1.6 x 1.77 x 0.8