Gree GRP-E05SH-R4 Owner's Manual page 18

OPERATING INSTRUCTIONS
Function & Control Display
SYMBOL DESCRIPTION
Power Button
Display
Temp Increase
/Decrease Buttons
M
Mode Button
Fan Speed Button
Timer Button
Sleep Button
+ / - Button
Low
Med
High
Auto
Fan
Sleep
Speed
Button
Fan
Button
Turns air conditioner On and Off.
When turned on, the display will show the set temperature, or time remaining
on the Delay Timer. Shows the Set Temperature while setting the temperature in
COOL mode.
In COOL mode, press (+) or (-) button to increase or decrease the set temperature
by 1°F. Set temperature range is 61°F (16.1 °C) to 86°F. (30 °C) Under DRY, or
FAN mode, this button is inactive.
Cycles through COOL, DRY, FAN.
COOL: Under this mode, cooling mode indicator is on. Temperature settings
range from 61°F (16.1 °C) to 86°F. (30 °C).
Changes the fan speed. Choose between Low, Med, High, Auto.
Note: Cannot be used in DRY Mode
When the unit is OFF, the timer can be set automatically to turn ON the unit. Timer
setting range is .5 (30 min) - 24 hours.
Press this button to enter into sleep mode. If unit operates in COOL Mode, after
SLEEP Mode is turned on, preset temperature will increase by 2°F within 1 hour;
preset temperature will increase by 4°F after 2 hours. Unit will operate at this
temperature until shut off. Sleep function is not available for FAN Mode, DRY
Mode.
Display
Cool Mode
Cool
Dry
Fan
Mode
Button
Timer
Button
On/Off
Button
FUNCTION
18
Dry Mode
Fan
Mode