Gree GRP-E05SH-R4 Owner's Manual page 13

INSTALLATION INSTRUCTIONS
Horizontal Sliding Window
1
A
Exhaust Nozzle
Screws
B
A) Insert
Exhaust Nozzle
B) Attach
Protective Guard
with 2
Screws.
3
Open the window and measure the height inside the
window frame.
A) For windows with inner height of 20.5" (52 cm)
only use the Window Panel
B) For windows with inner height over 20.5" (52 cm) up
to 38.5" (98 cm) insert
C) For windows with inner height over 38.5" (98 cm)
up to 56.7" (144 cm) insert
.
Extension Panel
Window Panel
Inner Side
Protective Guard
into .
Window Panel
onto
Exhaust Nozzle
A
Window Panel
Adjustment panel
B
C
Extension panel
Adjustment panel
Adjustment Panel
Adjustment Panel
2
Robert to insert
correct image
A) Attach
Support A
Window Panel
Washers, 2 Nuts
B) Attach the
with
2 Bolts, 2 Washers, 2 Spring Washers, 2
in this order.
Nuts
4
Cut the
Foam with Adhesive
the window and attach to window sill.
Note: If Extension Panel or Adjustment
Panel are too long, use a Pencil and Saw
to cut panels to fit window frame.
and
13
on the outer side of the
with
2 Bolts, 2 Washers, 2 Spring
in this order.
on top of the
Rain Shield
to fit length of
Support
Foam
Adhesive