Download Print this page

IKEA GRILLSKÄR Manual page 36

Hide thumbs Also See for GRILLSKÄR:

Advertisement

Available languages

Available languages

Connecting to the Cylinder
• Confirm all barbecue control knobs are in the
'OFF' position.
OFF
HI
LO
OFF
• Connect the regulator to the gas cylinder
according to the instructions below and the
instructions from the gas cylinder supplier.
Read carefully before use
2
3
Table (A)
1
COUNTRY
DK/NO/ES
Operating and installation instructions
Fig 1
• KOSAN type 682 is a domestic regulator used to
supply gas to utilities at specific pressure and
flow, as indicated on the label(1).
• KOSAN type 682 must be fitted directly to the
cylinder featuring a Ø35mm (G.56) quick
OFF
connection valve. Make sure the regulator inlet
and outlet are compatible with the cylinder and
the appliance being used.
• The gas cylinder must always be kept in the
Fig 2
vertical position. Do not move the cylinder
during operation. When the device is used
outdoors, it shall be positioned or protected
against direct penetration by any tracking water
• KOSAN type 682 versions feature a release valve
(the marking "PRV" is visible on the label (1) are
generally not type approved for use in closed
premises (see local laws on the subject).
• Never look for gas leaks with a live flame. Use
Fig 3
instead a solution of water and soap.
• In the event of any faults being found, close the
gas supply and immediately contact your gas
supplier.
• Ensure that the hole on the cover (VENT) is not
obstructed or blocked(2).
• This regulator is not for use in caravans and
motor caravans.
Fig 4
ON
OFF
INLET
OUTLET
Jumbo
HOSE NOZZLE
Ø13mm
36
Fig 5
Fig 6

Advertisement

loading