Table of Contents
Advertisement
Accessories Status
Within the accessory status, you can view how much of each accessory has been
consumed, and reset the counter for each accessory.
S To reset the counter for your installed accessory, touch the RESET but-
ton, then press SAVE.
S To return to the previous menu, press CANCEL.
Temperature Control Status
The Temperature Control Status allows you to take a quick look at the actual
temperatures, and temperature set points for each zone in your system.
S When you are done looking at your zone status, press DONE.
The system will indicate which mode is running by showing flashing arrows
towards either the heating or cooling set point. For a zoned system, the system
shows flashing arrows for each zone currently being conditioned. If the system is
preparing for the next program period, an indicator will be displayed to show that
the system is moving the temperature toward the next programmed set point. In
zoned systems with the simultaneous heat cool demand auto mode active, the
32
A12108
Advertisement
Table of Contents
